When I am not on the computer I enjoy mountain biking. It keeps me active, in decent shape, and is way more thrilling than any roller coaster. Coasters are fun but not scary because you know nothing bad will really happen. As the scars on my arms and legs can attest, mountain biking has real danger.
Parts can get expensive to maintain and fix though which means I try to do as much work as possible myself.
One of the most complicated parts on a mountain bike is the suspension fork. They are a combination of high pressure and different kinds of oil and grease. Mine is currently a 2011 Rockshox Reba RL. A decent fork and luckily it is pretty easy to maintain and take apart. Easy enough that there are official videos from Rockshox about how to do it yourself.
The other day I was riding and heard a loud popping sound. I was on a very steep trail so I stopped and looked at both tires. Both were normal. Then I looked down and saw my fork.
The way the fork worked it would still function normally because the actual parts that act as the suspension are inside of the tube. The part that popped up is more of a dust seal to keep debris from getting into the oil bath below.
This had happened once before. I just popped it back into place and rode for the next 6 months. I figured now it was time to make sure everything was lubed up.
My guess is that air was leaking into the oil bath chamber. Put enough force on it and something has to give. Making sure everything was properly lubed up should help stop it from happening.
I tried to get some pictures of the process, but it is hard to take pictures of things when I need two hands to hold everything, and my hands are covered in grease and oil.
First step is to take off the brakes.
Then take off the step/handlebars.
Now we have just the fork itself.
Pull out the red rebound adjuster. It is just stuck in there with pressure.
You have two things you need to unscrew. One requires a socket wrench, the other a hex wrench. The trick is that they are pressure fitted. So that means you need to loosen them up a bit, but don't take them all the way off. Then you stick the wrench on it and hit it with a mallet. Each side is pressure fitted so you will have to do it on both sides. Unfortunately I couldn't figure out how to take a picture while hold the fork in one hand and hitting it with a mallet with the other.
As soon as you get the pressure fitting loose, unscrew the two screws and pull the uppers away from the lowers. At this point any oil in the forks will drain out. Make sure you have a bucket or something to collect it in. The Reba only needs 5 ml in each side so there shouldn't be too much.
The uppers fully released from the lowers.
Unscrew the top.
The snap ring is pretty difficult. I found it easier if you use a spare socket to push down on the air spring while trying to get the snap ring out.
Once the snap ring is out you can pull it out of the bottom.
The fork came with 2 spacers. With all 2 it is set to 80 mm. I removed both of them to bring it to 115/120 mm. If you want 100mm of travel just take out 1. I believe the newer versions only support 80 and 100mm.
I put some more grease on it and put it back inside.
Put the snap ring back on and tight up the top section.
I also took time to clean up the dust wipers a bit.
This one was pretty dirty. I also made sure to use plenty of grease on the foam dust wipers. It is surprising how well they suck up the grease.
I didn't get pictures of this but the last step is to put the uppers and lowers back together, pour some oil into the chamber and then screw the two bolts back down. Replace the crush washer with new ones. They came in a back of 50 for 5 bucks, so if you ever need one I am sure I could find a spare one.
I will usually let the fork sit for a hour or so to make sure no oil leaks out. I once made the mistake of not tightening one of the bolts enough. This caused oil to leak onto the brake pad. It still acted somewhat normal until you tried to really stop hard. It just didn't have any bite. Unfortunately I didn't discover it until my first switchback and ended up in the bushes. It was a miserable ride since I like braking hard at the last second.
After everything is back together get out and ride!
I didn't take tons of pictures, but here are a few links for some good information if you are thinking of attempting this.
Tear down by a forum member at mtbr.com
Official technical manuals
Here are some YouTube videos by SRAM(owners of Rockshox)
Lower Leg install
Happy riding!
This is the first time i read your blog and admire that you have posted on this...I really found useful.Keep updated.
ReplyDeleterockshox suspension tuning